Selasa, Agustus 4Informasi Jadwal / Schedule Training 2020 - 2021
Shadow

Training Offshore Installation, Hook-Up, Precommissioning and Commissioning (Pipeline and Top Side)

Training Offshore Installation, Hook-Up, Precommissioning and Commissioning (Pipeline and Top Side)

The Oil and Gas Offshore Engineering projects are technically and commercially challenging, therefore good knowledge and competency of the project team members throughout the different phases of works are keys to the successful execution of these projects.

This training course aims to provide the participants with comprehensive foundation knowledge of Offshore Engineering. The participants will be better prepared to function in the design engineering, fabrication and construction department, offshore installation, hook-up, commissioning and start-up of offshore projects. Such roles include field and discipline engineers, project engineer, cost estimating engineers, construction and fabrication engineers, contract admin executives, CSR, construction supervisors and engineers.

The training course will cover:

  • Overview of Field Development Planning (FDP) and Offshore Project Management
  • Design engineering and procurement
  • Substructures and topsides fabrication, load-out
  • Sea transportation and offshore installation
  • Hook-up, testing, commissioning, and start-up

The course places particular emphasis on the principles and steps of the works, using engineering calculations, flowcharts and diagrams to enhance the learning experience of the participants. Relevant international and typical client engineering standards will be referred.

This training course will feature:

  • Overview of field development planning (FDP) and project management
  • Design engineering process, deliverables and flowchart
  • Fabrication techniques such as cutting and welding, blasting and painting
  • Erection and assembly techniques, including cranes and lifting techniques
  • Load-out techniques, preparations and ballasting
  • Sea-fastening engineering and implementation
  • Major and support marine vessels, major installation equipment
  • Structure and topsides installation techniques
  • Pipelaying and riser installation activities
  • Subsea installation and diving support activities
  • Hook-up workpack process and execution
  • Mobilisation of marine vessels, construction crew, marine crew and construction equipment
  • Hook-up activities for each engineering discipline
  • Commissioning activities, start-up and handover to client

Training Objectives

By the end of this training course, participants will be able to:

  • Understand what entails in field development planning (FDP) and project management
  • Understand the complexities of Offshore Engineering activities
  • Appreciate the complete metamorphosis of Offshore Engineering –from the  Design phase till the Commissioning and Start-up phase
  • Understand Fabrication, Erection, Loadout and sea-fastening implementation at Fabrication yards
  • Understand the selection of the major support marine vessels and major installation equipment for offshore installation works.
  • Fully understand the structure and topsides installation techniques
  • Understand what is involved in Pipelaying and riser installation works & Subsea installation and diving support activities
  • Fully understand what are involved in mobilisation of marine vessels, construction crew, marine crew and construction equipment
  • Understand the scope of work for hook-up and commissioning activities

Who Should Attend?

  • Field Engineers, CSRs, Construction Supervisors, Project engineers
  • Operations engineers
  • Workpack engineers
  • Structural engineers
  • Metocean engineers
  • Pipeline discipline engineers
  • Subsea equipment engineers
  • Various discipline engineers (structural, piping, equipment, electrical, instrumentation)
  • Maintenance engineers
  • Contract admin, buyers and procurement executives
  • Cost estimating, project control and planning engineers
  • Diving and diving support personnel
  • Managers and executives who are new to Offshore engineering projects
  • Other engineers and technicians who need to update their current Oil and Gas industry experience and wanting to move to Offshore Field development Projects.
  • University engineering lecturers who wish to be CPD-certified by Institution of Engineers (IEM) at their respective countries

Course Outline

Field Development (FDP), Project Management and Design Engineering

  • Pre-course assessment test
  • Course learning objectives vs course participants’ expectations
  • Overview of Field Development Planning (FDP
  • Project Management team (PMT), roles and responsibilities
  • Contracting, subcontracting and procurement activities
  • Design engineering process, deliverables and flowchart
  • Health, safety, environment and security requirements, including training requirements and qualifications of personnel
  • Emergency response procedure (ERP)
  • QAQC requirements, documentation and drawings controls

Fabrication and Onshore Construction

  • Fabrication yard layout, load-out methods, workshops and major equipment types, foundation preparation and preliminary works
  • Planning and schedule , fabrication cost-time-resource (CTR) estimating
  • Fabrication, erection and assembly of major structures, substructures;, topsides and living quarters
  • Pipeline procurement, concrete coatings, pipeline load out and transportation
  • Welding and welder qualifications
  • Blasting and painting activities;, testing and inspection requirements
  • Typical manpower and fabrication equipment planning and management;
  • Skid and packaged equipment procurement, Factory acceptance testing (FAT), delivery, storage and preservation and installation
  • Weight control and weighing of structures in fabrication
  • Yard pre-commissioning activities
  • Jacket commissioning, trial fitting and ship loose items management
  • Pile and conductors make-up and fabrication, transportation arrangement consideration and load out
  • Load-out planning, engineering for substructures and topside; and load-out execution, ballasting techniques and calculation
  • Insurances, commercial and warranty surveys

Offshore Facilities, Pipelaying and Subsea Installation I

  • Offshore transportation and installation phases, including planning and scheduling
  • Major and support marine vessels, major equipment types
  • Offshore installation considerations, engineering and calculations
  • Weight control and onshore weighing reports of structures
  • Transportation analysis and sea-fastening
  • Launching, lifting and installation of substructures
  • Upending of substructures
  • On-bottom stability, pile and conductor make-up, piling and grouting of substructures
  • Lifting analysis of topsides and modular topsides construction
  • Float over of integrated topside deck
  • Geotechnical and geomatics surveys
  • Anchor-pattern preparation and approval

Offshore Facilities, Pipelaying and Subsea Installation II

  • Vessels availability, contracting and procurement activities and considerations
  • Cost-time-resource (CTR) estimating for transportation and installation
  • IPOP and pre-execution reviews
  • Mobilisation preparations
  • Insurances, commercial and warranty surveys
  • Metocean activities and installation window considerations
  • Substructures installation – launching, lifting, self installation & novel methods
  • Topsides installation – modular lifts, float-over and novel methods
  • SIMOPS considerations for offshore installations
  • Pipeline and riser installation
  • Reel pipelines and umbilicals laying
  • Subsea equipment installation and diving support activities
  • Insurances, commercial and warranty surveys

Hook-up Construction and Commissioning (HuCC)

  • HuCC project planning and scheduling, monitoring and reporting
  • Workpack process and execution
  • Procurement – cost-plus and overheads
  • Construction and marine crew manpower recruitment and mobilisation
  • Onshore minor fabrication
  • Mobilisation of major and support marine vessels
  • Overview of marine operations
  • Onshore supply base and Load-out activities
  • Logistics support activities
  • Hook-up activities, namely blasting and painting, cutting, fitting and welding, piping and piping supports, platform appurtenances, electrical and instrumentation works
  • Pre-commissioning activities, hydrotesting, NDT and inspection
  • Commissioning activities and dossiers
  • Start-up (first oil, first gas), hand-over and punch-list items
  • Post-project activities, final documentation, change-order and variation orders, lesson learnt database and dissemination
  • Course summary
  • Post-course Assessment Test

===================================================================

General Notes

  • All our courses can be facilitated as Customized In-House Training course.
  • Course duration is flexible and the contents can be modified to fit any number of days.
  • As for Open Enrolment Courses, we offer our clients the flexibility to chose the location, date, and time and our team of experts who are spread around the globe will assist in facilitating the course.
  • The course fee includes facilitation, training materials, 2 coffee breaks, buffet lunch and a Certificate of successful completion of Training.
  • FREE Consultation and Coaching provided during and after the course.

VENUE 

Yogyakarta, Jakarta, Bandung, Bogor, Cirebon, Solo, Semarang, Surabaya, Malang, Bali, Lombok, Samarinda, Balikpapan, Banjarmasin, Pontianak, Makassar, Medan, Palembang, Lampung, dll serta Timor Leste, Thailand, Singapore , Kuala Lumpur.  (dengan harga dan minimal kuota yang berbeda)

Permintaan Brosur penawaran Training Pelatihan ( Harga, Waktu dan Tempat) silahkan Menghubungi kami.

Open chat
Halo Bapak/Ibu,
Ada yang bisa kami bantu?