RISK BASED INSPECTION (RBI)

RISK BASED INSPECTION (RBI)

INTRODUCTION RISK BASED INSPECTION (RBI) :

Risk Based Inspection (RBI) is a systematical process that identifies, assesses and map  industrial risks, which can compromise equipment integrity in both pressurized  equipment and structural elements. The high risk equipments are then managed by a  proper inspection interval, method and coverage. In the Risk Based Inspection (RBI) philosophy, it is more cost- effective to allow some systems to fail as long as the consequences of the failure are  low, on the other hand, some systems may have such high consequences of failure  that failure is totally unacceptable, and therefore, these items should receive most  attention by using a proper inspection plan & practice. In this course API 581 and API  580 and other DNV and ABS guidelines and recommended practices, will be consulted.

RISK BASED INSPECTION (RBI) MATERIAL OUTLINE :

1.    Defining boundary system to be assessed
2.    Screening operating unit within a plant to identify area of high risk.
3.    Identifying the damage mechanism operative
4.    Determining the technical module sub-factor and likelihood of failures
5.    Determining the hazard areas and consequence of failure
6.    Estimating a risk value of each equipment, tabulated and ranked
7.    Prioritizing the equipment maintenance based on a the measured risk
8.    Designing an appropriate inspection program.
9.    Systematically managing the risk equipment failures.



RISK BASED INSPECTION (RBI) BENEFIT :

  • Increased knowledge of equipment which may pose a potential risk.
  • More reliable equipment and plant operation.
  • Increased safety.
  • Cost optimization through switching to non-invasive inspection techniques.
  • Possibility to tailor shutdown scope.
  • Option to extend run lengths where applicable national regulations permit it.
  • Increased teamwork during the implementation process.
  • Development of a knowledge database including equipment design, process features, damage mechanisms and inspection strategies

 
WHO SHOULD ATTEND THIS TRAINING?

Plant and Pipeline Operators, Supervisors, Engineers and Manager or every one who should know this topic.

Investasi dan Fasilitas Training

  • Harga : (dilampirkan dalam Brosur penawaran)
  • Fasilitas : Certificate, Training kits, USB 8 GB, Lunch, Coffe Break, Souvenir, City Tour
  • Untuk peserta luar kota disediakan transportasi antar-jemput dari Bandara/Stasiun ke Hotel (berlaku bagi perusahaan yang mengirimkan minimal 2 peserta)
  • Quota minimum Running 2 peserta ( jogja ), 3 Peserta ( Solo, Semarang) Quota minimum Running 3 peserta (Jakarta , Bandung dan Surabaya ) –  ( Untuk Manado, Bali , Batam, Pontianak, Balikpapan dan Lombok Quota minimal 4 peserta)

 

Permintaan Brosur penawaran Training ( Waktu dan Tempat) silahkan Menghubungi kami via :

Mobile : (Lihat di Banner sebelah kanan)

Email : trainingcenterindo@gmail.com / info@jadwaltraining.co.id

Web: www.informasitraining-indonesia.com

Web  www.jadwaltraining.co.id

 

Catatan :

  • Pelatihan ini dapat di-customized sesuai kebutuhan perusahaan Anda bila diselenggarakan dalam bentuk In-House Training. Untuk permintaan In-House Training dengan jenis topik lainya, silahkan mengirimkan ke alamat email yang tercantum di web kami.
  • Request Training. Jika anda membutuhkan informasi pelatihan yang belum tercantum pada website ini, atau anda ingin memberikan usulan materi yang sesuai dengan tingkat kebutuhan perusahaan anda, silahkan mengirimkan ke alamat email dibawah ini.
  • Bila tidak ada tanggal dan waktu atau yang tercantum sudah kadaluarsa didalam artikel mohon tanyakan kepada kami untuk jadwal terbarunya.

Lokasi Training Pilihan : di Yogyakarta, Jakarta, Bandung, Bogor, Surabaya, Malang, Bali, Lombok, Balikpapan, Makassar, Medan, Batam, Riau, Pontianak, Semarang, Solo, Manado, dan Kota-kota lainnya  (dengan harga dan minimal kuota yang berbeda)